兄弟打印机490清零(Brother Printer 490 How to Reset to Factory Settings)

Brother Printer 490 How to Reset to Factory Settings

If you are using a Brother Printer 490 and you are experiencing issues with the way it is functioning, one of the best solutions you can try is resetting the printer back to its factory settings. This can be very helpful in fixing a range of problems, including those related to the printer's software, internal settings, network configurations, and others. Resetting the printer to its factory settings will erase all the customized settings that you have made, and restore it to its default settings. Here are the steps to follow to reset your Brother Printer 490:

Step 1: Turn off the Printer

The first step is to turn off the Brother Printer 490 and make sure it is not connected to any power source. This is important to prevent any electrical problems that may arise due to the reset process.

Step 2: Press the Go Button

The next step is to press and hold the "Go" button on the front panel of the printer. While you are pressing the button down, you should also turn on the printer. Continue to press the button for about 10 seconds, or until the printer's "Ready" light comes on.

Step 3: Release the Go Button

Now that the printer's "Ready" light is on, you can release the "Go" button. This will put the printer into "factory reset" mode.

Step 4: Reset the Printer

The final step is to reset the printer, which can be done in one of two ways:

Press the "Go" button seven times in quick succession. Your printer should now be reset to its factory settings.

Press and hold the "Go" button for about five seconds, and then release it. Wait for the printer's "Ready" light to flash twice. Press the "Go" button again seven times in quick succession. Your printer should now be reset to its factory settings.

Once you have successfully reset your Brother Printer 490 to its factory settings, you can start reconfiguring it according to your needs. You may need to reinstall the printer software, connect it to your network, and make other customizations to ensure that it functions as intended. However, resetting the printer to its default settings is a great way to resolve many common issues that may have been causing problems with the printer's performance.

Conclusion

If you are using a Brother Printer 490 and you are experiencing issues with how it is functioning, resetting it to its factory settings can be a great way to solve these issues. With these steps, you can reset your printer and restore it to its default settings, erasing all customized settings that may have been causing problems. Keep in mind that resetting the printer may also require you to reconfigure it and install the printer software again, but it is a small price to pay for a printer that functions correctly.