ts3380打印测试页_

IBM MODEL 3380 DISK SUBSYSTEM TEST PAGE

TESTING SYSTEM SOFTWARE

This test page is designed to verify that your IBM Model 3380 Disk Subsystem is functioning properly. Each component of the system should be tested to ensure optimum performance.

To begin, make sure the power to the system is turned on. Depending on the model, several diagnostic LEDs (Light Emitting Diodes) may be present. These autonomously monitor various components of the system from the source power to the disk drives.

Next, connect your system to the controller. Use the appropriate cables and make sure all connections are secure. If the connection is made correctly, the LEDs may have changed from their last state.

Finally, begin testing the system using the built-in diagnostic software. As part of the setup process, you should create a log file which will track the progress of the tests and any errors that may occur. This log should be examined closely to determine if any errors exist.

Once the diagnostic software has been run, proceed to check the results. Check the system's responses to various I/O commands, as well as its performance in reading and writing disk sectors. If the disk drives appear to be running slower than they should, check that the servo track is properly aligned.

If everything looks satisfactory, you can now proceed to use the system in your normal activities. Remember to check the log file periodically to ensure everything is running smoothly.

In conclusion, the IBM Model 3380 Disk Subsystem is an excellent choice for both home and business users who need a reliable storage solution. Testing the system properly on a regular basis is essential for maintaining optimum performance.